Why the PERMA-DRAIN Xterior System Is the Gold Standard in Exterior Basement Waterproofing
Water always finds the path of least resistance—and your foundation shouldn’t be it. If you’re dealing with signs of water seepage, damp basement walls, or just want to proactively protect your home, exterior basement waterproofing is the most comprehensive solution available. At PERMA-DRY, we go beyond the basics. Our PERMA-DRAIN Xterior (PDX) system isn’t just built to code—it’s built to outperform.
Unlike interior-only drainage systems that manage water after it enters the home, the PERMA-DRAIN Xterior system is about prevention. By addressing water at the exterior foundation wall, we stop it before it infiltrates your living space—eliminating moisture, mold risks, and damage to insulation, studs, and drywall.

When Is Exterior Basement Waterproofing the Right Choice?
Exterior systems are the best choice when:
- Your basement is already finished with drywall, flooring, or cabinetry
- You’ve noticed minor seepage but want to fix the problem before major damage occurs
- You have features like a bathroom, laundry, or home gym in the basement that you can’t afford to lose to water
- You value a proactive solution that protects the full foundation, not just where water is visible
Understanding Hydrostatic Pressure
Hydrostatic pressure occurs when water builds up in the soil around your foundation and pushes inward. Over time, this pressure can cause leaks, cracks, or even structural failure. Drain tile systems are designed to relieve this pressure by intercepting and redirecting water before it causes harm. The PERMA-DRAIN Xterior system is engineered specifically to combat hydrostatic pressure from the outside of the foundation—before it can cause issues inside.
What the National Building Code Requires—and Where Most Contractors Cut Corners
“A drainage system consisting of a minimum 100 mm (4 in.) diameter perforated pipe shall be installed on a bed of coarse gravel or crushed stone adjacent to the footing…” – NBC 2015, Section 9.14.3.1(1)
Despite this clear requirement, some contractors use inexpensive corrugated pipe, place it directly on soil or the top of the footing, or backfill with unsuitable material. These shortcuts reduce system lifespan and increase risk to your home. We refuse to cut corners—because when it comes to foundation protection, details matter.
How the PERMA-DRAIN Xterior System Exceeds Code
1. Heavy-Duty Drain Tile System
- 4″ Schedule 40 Perforated PVC Pipe for superior strength and flow
- Optional upsizing for high-water conditions or large structures
2. Proper Bedding and Backfill
- Minimum 300 mm (12″) of clean, washed crushed stone
- Encased in geotextile filter fabric to prevent soil intrusion and maintain flow rate


PERMA-SEAL FC: The Seamless Waterproofing Advantage
We don’t rely on tape seams or factory overlaps. PERMA-SEAL FC is a cold-applied, liquid elastomeric urethane membrane that creates a continuous, fully adhered barrier over the foundation. It fills pores and pinholes and remains flexible to accommodate future movement or settlement. Where other membranes may crack, peel, or gap, PERMA-SEAL FC stays intact—providing real peace of mind.

DRY-COVE Air-Gap Membrane: The Final Layer of Defense
- Creates a vertical drainage plane to channel any water to the drain tile
- Protects the PERMA-SEAL FC from backfill abrasion
- Functions independently even if small wall cracks form over time
These two layers—PERMA-SEAL FC and DRY-COVE—work together to provide complete exterior basement waterproofing. It’s not just a system, it’s a shield.

Built to Last—and Built to Work in Canada
With freeze-thaw cycles, coastal rains, and varied soil types, Canada presents real challenges for foundations. That’s why we design every PERMA-DRAIN Xterior installation for the specific property, water table, and grade conditions at hand. Our systems aren’t “one size fits all”—they’re purpose-built to protect what matters most: your home.
Comparing PERMA-DRAIN Xterior to Interior Systems
Feature | Interior System | PERMA-DRAIN Xterior |
---|---|---|
Disruption to finished basements | High | Minimal |
Stops water before it enters | No | Yes |
Ideal for finished spaces | Less ideal | Yes |
Hydrostatic pressure relief | Yes (interior relief) | Yes (exterior relief) |
Addresses foundation wall integrity | No | Yes |
FAQs About Exterior Basement Waterproofing
Will you need to excavate my entire foundation?
Not necessarily. While full-perimeter waterproofing is often best, we also perform targeted excavations when appropriate to resolve localized leaks or weak points.
Can this be done year-round?
Yes. Spring through fall is ideal, but winter installations are possible with planning. We take care to minimize disruption regardless of season.
How long does installation take?
Most projects are completed in 2–5 days depending on access, excavation length, and weather conditions.
Will you damage my landscaping?
We aim to preserve your existing landscape features and restore disturbed areas with care. Sod, gardens, and patios are flagged, protected, or reinstalled as part of our standard process.
Invest in Long-Term Peace of Mind
Your home is your biggest investment—and water damage is one of the most common and costly threats to it. The PERMA-DRAIN Xterior system is a permanent, professionally installed solution that pays for itself in peace of mind, air quality, and home value.
Call PERMA-DRY today to schedule a no-pressure inspection. We’ll show you how exterior basement waterproofing done right can keep your foundation dry, your basement livable, and your family protected—year-round.
